These two drives don’t share a capacity, and that’s the point — this isn’t a spec-for-spec rematch, it’s the real decision a lot of buyers face: step up to NVMe, or stay on SATA? The Micron 7300 Pro and Samsung PM893 are the SKUs we actually quote for each path, so here’s what the difference
Micron 7300 Pro vs Samsung PM893: NVMe vs SATA for Enterprise Storage Read More »
Seagate’s Exos line covers the same enterprise ground as WD’s Ultrastar series — CMR recording, 7200 RPM, SATA, built for 24/7 operation — but the X16, X18, and X20 aren’t just the same drive at three capacities. Here’s what actually changes between them. Quick answer If you’re bay-constrained and want the lowest cost per drive,
Seagate Exos X16 vs X18 vs X20: Which Capacity Fits Your Storage Server? Read More »
A TrueNAS or ZFS build lives or dies on three component choices: the HBA, the drives, and whether you add NVMe for cache. Get those right and the rest of the build is straightforward. Here’s how the pieces fit together. The HBA: why IT mode matters ZFS wants direct, unmediated access to each drive —
Building a TrueNAS/ZFS Storage Server: The Parts That Actually Matter Read More »
Enterprise hard drives share the same basic SATA interface and 7200 RPM speed class across brands, but the details that actually affect reliability and performance in a RAID array or NAS — recording technology, workload rating, and helium sealing — vary. Here’s what to check before you buy. Quick summary For most backup, NAS, and
Enterprise Hard Drive Buying Guide: CMR, Workload Rating, and Helium Explained Read More »
Every enterprise SSD spec sheet lists the same handful of numbers, but they don’t all matter equally for every buyer. This guide covers the ones that actually change which drive is right for your workload — interface, endurance, and form factor — rather than every marketing bullet point on the box. Start with the interface:
Enterprise SSD Buying Guide: Interface, Endurance, and Form Factor Explained Read More »
The Samsung PM893 and Intel D3-S4510 sit in the same class: 2.5-inch, SATA III, read-intensive enterprise SSDs aimed at the same workloads. On paper their performance numbers are close enough that the spec sheet alone won’t make the decision for you — here’s what actually differs. Quick answer Performance-wise, these two are close enough that
Samsung PM893 vs Intel D3-S4510: Comparing Enterprise SATA SSDs Read More »
Western Digital’s Ultrastar DC line covers a wide capacity range, and the HC520, HC550, and HC560 all look nearly identical on a spec sheet: 3.5-inch, SATA, 7200 RPM, enterprise-grade. The real differences are capacity and recording technology, and they matter more than they might look for a NAS or server rebuild. Quick answer If cost-per-drive
Western Digital Ultrastar HC520 vs HC550 vs HC560: Which Drive Should You Buy? Read More »
What IT mode means, why ZFS and TrueNAS builders specifically want it, and how to check compatibility before you buy.
IT Mode Explained: Why ZFS and TrueNAS Builders Choose the LSI 9211-8i Read More »
Solid state or spinning disk? Here is how to decide based on workload, budget, and capacity needs for your business.
SSD vs HDD for Enterprise Storage: Which Should You Choose? Read More »
Both are solid state drives, but the interface changes everything about speed, cost, and use case. Here is how to pick.
NVMe vs SATA SSDs: What’s the Difference and Which Do You Need? Read More »
